This is a small part of our pilot-E book; Active, reactive and apparent power which are important quantities within the Marine and offshore industry.The E-book explains motorcharacteristics related to energyconsumption,and energysaving by means of power factor correction.In order to save fuel, or to achieve loadreduction on cable's which are used at your ship in case you are already dealing with overloaded cables.In this cases you can extend the life span of your cables because they get less deteriorated.

Soon Bastronic wil introduce the E-Book; 'Electrical reading course'

Bastronic is making tremendous progress at schelde shipyard (vlissingen,the netherlands).refitting GSF Labrador.

This is an example of how we are working at a course called 'electrical reading course'which we are developing as 

General knowledge harmonics

This section explains the differences between a circuit breaker and a contactor, which both make and break a circuit.The main difference between a circuit breaker and a contactor is that a circuit breaker is designed to detect and switch a short-circuit current and overload current when applicable,whereas a contactor is an automated switch.

Measure Temperatures in a Non-Contact Mode.

Emc directives

When you have earth leakage monitoring lamps installed on your ship’s electrical system, which is often the case in 24dc systems, ensure that these lamps are always of the same rate of power and voltage. When one of these lamps is broken: always exchange both lamps, otherwise this simple monitoring system will be useless.

Within the industry there are two types of frequently used, but essentially different temperature sensors. These are the PT 100 and thermo electric couples.  The essential difference between these two sensors is that the PT 100 is a temperature dependant resistor behaving like a PTC. PTC signifies positive temperature coefficient, which means that when a temperature rise occurs, the resistance increases proportionally. Therefore, the PT 100 is also known as a temperature dependant resistor or RTD (Resistant Temperature Device). The measuring range of these PT100 temperature sensors lies between -200ºC and 850ºC.

We recommend to read this article first;

We recommend to read this article first;

When you have an electronically controlled generator diesel engine, the following problem can occur: